BERNINI

(Engine Protection Modules)

This module monitors a diesel engine and includes a 30A Key-switch for manual start.

The Be20B provides outputs to arrange automatic starting.

Key features:

• DIN 96x96, temperature range -30/+70° C
• 7 outputs, 5 switch inputs, 1 analog input
• Pre-Heat setting, 7Vdc up to 33Vdc supply
• 8 LEDs, 2 push-buttons, 30A Key-Switch
• Manual and Automatic operating modes
• 4 starting attempts, 4 secs; Crank / 3secs; Rest Time
• Fuel warning with 5 minutes delay shutdown
• Flashing and steady LEDs, Alarm-Memory
• 15 Fast-on connection terminals 6,3x0,8

(A.M.F Controllers)

The Be2K is a high performance 3-phase A.M.F / Generator controller and monitoring system. It displays all parameters involved in the automation of a Generator.

A serial interface RS232, or RS485-MODBUS, is provided for Modem and Remote control.

This software allows you to program, monitor and calibrate measurements. The Be2k can be easily controlled by Mobile Phones, using the Be15 option. The Be15 also provides 15 additional programmable relay outputs.

Key features:

• Powerful set of 70 input-output lines
• 80 programmable parameters & real-time clock
• 3-Phase Generator & Mains monitoring
• RS232, RS485 includes MODBUS protocol
• Local or Remote operating modes selection
• 21 Operating Messages and 60 Alarm Messages
• Event Logging, scheduled maintenance programs
• Programmable timeout for RENTING applications

(A.M.F Controllers)

The Be21 is a universal single phase A.M.F. / Generator Control and Monitoring system.

It provides metering and alarm facilities via Display and LEDs. Operation of the module is via push buttons.

A mimic diagram with LEDs indication provides information regarding the status of the Mains, Generator and operating modes.

The Be21 is suited for 12V or 24V battery systems (automatic set up).

Key features:

• Extended temperature range -30/+70° C
• 28 programmable parameters
• 7Vdc up to 33Vdc supply
• Multifunction display includes h-meter
• Low cost digital controller
• Flashing and steady LEDs, Alarm-Memory
• Vac-Aac-Hz-Rpm-Vdc

(A.M.F Controllers)

The Be22 is a universal 3 - phase A.M.F. / Generator Control and Monitoring system . It provides metering and alarm facilities via Display and LEDs. Operation of the module is via push buttons.

A mimic diagram with LEDs indication provides information regarding the status of the Mains, Generator and operating modes. The Be22 is suited for a 12V or 24V battery system (automatic set up).

Key features:

• Extended temperature range -30/+70° C
• 29 programmable parameters
• 7Vdc up to 33Vdc supply
• Multifunction display includes h-meter
• Low cost digital controller
• Flashing and steady LEDs, Alarm-Memory
• Vac-Aac-Hz-Rpm-Vdc-M

Download BE22 Brochure.pdf

(Generating Set Controllers)

The Be24 includes in a standard DIN 96x96 module, all functions needed to control an engine.

The Be24 features 6 membrane-type push buttons, 2 LEDs, a 4 digit display, 5 static outputs, 9 inputs, and a 3-position (30A rated) Key-switch for manual start.

Key features:

• DIN 96x96, temperature range -30°/+70° C
• 6-display menu: A-V-RPM-Hz-Vdc-h
• 7Vdc up to 33Vdc supply, 30A key-switch
• 4-digit display , 2 LEDs, 2 push-buttons
• Manual and Automatic operating modes
• Interfaces Pick-up or W
• 600 Vac / 1000 Aac display range
• Automatic Periodic TEST
• 30 programmable parameters
• 15 alarm messages, 10 operating messages

(Generating Set Controllers)

The Be46 includes all functions needed to control and monitor a genset. Its programming runs quickly and all parameters and operating information are indicated by means of messages and symbols.

The Be46 includes interface with an oil and temperature gauge, fuel sender, and a magnetic pick-up. It provides 'AUTO','MAN', and 'OFF' operating modes.

Measurements include Vac, Aac, Vdc, kVA, kVar, kW, Pf, Hz, Vdc, hour count, R.p.m., Oil Pressure, Engine Temperature and Fuel Level.

Key features:

• DIN 96x96, temperature range -30/+70° C
• 6 outputs, 6 switch inputs, 7 analog inputs
• 7Vdc up to 36Vdc supply, IP55
• 13 LEDs, 8 push-buttons, 4 digit display
• Manual and Automatic operating modes
• 3-Phase voltage up to 500Vac
• 44 Programmable parameters, 32 messages
• KW,KVA, PF and current up to 9000Aac

(Engine Protection Modules)

The Be72 provides Manual start for engine-driven applications. Automatic fault protections include: Engine low oil pressure, High Temperature, Emergency and Belt break.

The Be72 provides the following outputs: Start, Stop, Preheat, Alarm and Fuel solenoid. In order to use the Be72 only in manual mode, a 50A rated key switch is provided to energize the starter.

All functions are indicated by means of 7 LED lamps. Electrical connection is via a 1/4 inch blade terminal.

Key features:

• 50A dc Key-switch for Manual start
• Short circuit proof solid state outputs
• Din size 72, 40mm depth, shock-proof operating temperature -30/+70° C full 3-year warranty, cost effective
• Operating voltage range 5,5 to 36Vdc